The Rectangular Post Gate Kit features components like flanges, deck sleeves, and hinges, and is available in 4-foot and 5-foot heights, with color customization options. The installation process involves five key steps: flange installation, post and fence positioning, bracket attachment, hinge placement, and the Trilatch gate latch system setup. The kit is complemented by detailed instructions and video guides.

Tools and Materials Needed Step 1: Preparing for Installation Before you begin, ensure your deck is clear and clean. Gather all necessary tools and materials, including the All Safe Corner Post, and measure your work area carefully. Step 2: Marking the Layout Step 3: Measuring for Accurate Placement Step 4: Drilling and Setting the Post Step 5: Installing the Fence Step 6: Final Adjustments and Finishing Touches Conclusion The Corner Post from All Safe elevates the quality and durability of your mesh pool fencing installations. Do Prefer video instructions ? Checkout our YouTube installation video:

Introduction The U-Safe Gate is All Safe’s latest innovation in the pool safety industry. Designed primarily for the DIY market, the U-Safe Gate is by far the easiest gate to install. Right from the box, the U-Safe Gate comes with hinges and latch already installed, radically simplifying the overall installation process. The U-Safe Gate has a U shape exoframe which is far less susceptible to varying fence tension  keeping the gate isolated allowing  proper latch adjustment. Even though the U-Safe Gate has been designed for the DIY market, It also has uses for the more advanced installer. Wood Deck, Artificial Turf, and Dirt areas that would normally take extensive time and materials to prepare, can now be installed with minimal effort.   The U-Safe is only available exclusively in Peg and is designed to be used with our Classic Peg Style Fence and Components. This brings us to the next All Safe advancement in the pool safety industry. The Peg Shifter. The Pegs in the U-Safe Gate are adjustable up to a total of ¼ inch.  Another feature in the simplicity of the U Safe Gate is that it does not require special angles to be drilled for the gate to

Have you ever needed to cut a roll of mesh pool fence material, only to wonder how to give it a finished edge? This guide will show you how to achieve a polished look using “Border Tape” and “Border with 1 Thread,” while ensuring the durability of the fence. What You’ll Need: Steps to Create a Finished Edge: Step 1: Gather Your Materials Make sure you have all the necessary items ready: Border Tape, Border with 1 Thread, scissors, and the material you are installing. Step 2: Apply Border Tape Place the sticky side of the border tape along the edge of the cut material. Step 3: Attach the Border with 1 Thread Fold the border with 1 thread over the cut material, ensuring both sides are covered by the border. Step 4: Secure the Tape Gradually peel off the red tape (about 4-6 inches at a time). Be careful not to remove too much at once, as the material will stick immediately upon contact. Step 5: Smooth the Tape Continue pulling off the red tape along the length of the cut material. Run your fingers over the border as you go to ensure it sticks evenly. Step 6: Flip

Whether you’re a seasoned professional in installation, just starting out in the industry, or diving into a DIY project, drilling the correct angled holes for a pool fence is crucial for both functionality and aesthetics. The Hammer Drill Guide presents the most cost-effective method for installing a removable pool fence. Let’s explore the steps for utilizing the Hammer Drill Guide effectively. Please note: This video & photos on this article include a vertical sleeve component that was part of a prototype and is not included with the final product. Tools Needed No Lean Setting Starting with the guide’s first setting, we aim for drilling straight, or plumb, holes, referred to as NL (No Lean). This is essential when your fence is designed to follow a straight path, ensuring all holes are plumb, except for those designated for the gate, which we will discuss in more detail shortly. Installing Begin by inserting the ⅝ inch hammer drill bit through the bottom of the drill guide. Next, using a deck sleeve and a sharpie, mark the drill bit to indicate the required drilling depth, approximately 4 ½ inches. Before attaching the drill, place the guide over your mark. Use the three Allen

Wood or composite decks have challenges that are very different from other surfaces you will encounter on a typical pool fence installation. If you have a Wood Deck and are considering installing a Pool Fence, it may be possible. If you can access the joists under your deck, this is the best case scenario because you will need to install along the joists. We would recommend hiring a professional reseller/installer to do any pool fence installation in wood or composite decking. Tools Needed A typical core drill on a stand will be needed to drill plumb holes in the wood or composite deck. The drill should have the ability to accept: You should also use something like a piece of vinyl flooring or thick cardboard between your drill stand and the deck to keep from scratching or marring the customers deck. Pool Fence Material Needed If you can locate a joist that will span your layout, then you can use All-Safe’s pre-assembled, 36 inch spaced, 15 foot long, peg pole section of fence. If the structure of the deck is staggered and not hitting 36 inches on center, then you should assume that the fence will need to be built

If your pool fence is running from one wall to another or you need to terminate part of your pool fence at a wall, our wall attachment kit is here to help. Safety is essential when installing pool fences, so it’s crucial to ensure the surface you are installing into is strong and secure. We will show you the installation process step-by-step and share tips to ensure your wall attachment kit is properly installed. Available Wall Attachment Kits How to Infographic How to Video Gallery