Add a convenient grip to your removable pool fence with the EZ-Close Handle. Install one handle for better control when pulling back or rolling up an opened fence section, or use two handles to help pull adjoining poles together and reduce tension when releasing or reconnecting the section latch. Sold individually
*TWO ARE SHOWN AS AN EXAMPLE; SOLD INDIVIDUALLY*
$10.00
All-Safe has a trusted network of local pool safety installers ready to help you today!
The EZ-Close Handle provides a comfortable grip for manually opening, closing, or rolling back a section of removable pool fencing. It can be added during a new installation or installed later on an existing compatible fence pole.
Install one handle when you want a convenient grip for controlling an opened fence section. For additional leverage at a section opening, install two handles—one on each adjoining pole. Bringing the handles together helps reduce tension on the section latch, making it easier to disconnect or reconnect the fence.
An EZ-Close Handle opening can provide occasional access through the fence without the expense of adding a gate. However, it remains a manually operated fence opening and must be properly reconnected and latched after every use.
The EZ-Close Handle does not make the opening self-closing or self-latching and should not be considered a replacement for a code-required gate. Always confirm applicable pool-barrier requirements before choosing an access method.
No related resources found for this product.
One handle provides a convenient grip when pulling back or rolling up an opened fence section. Two handles, installed on the adjoining poles at a section opening, provide better leverage for pulling the poles together and reducing tension while releasing or reconnecting the section latch.
No. It creates a more convenient grip for a manually operated fence opening. The fence section must be returned to position and securely latched after every use.
Yes. EZ-Close Handles can be installed during a new fence installation or added later to a compatible existing fence. You may need to add an additional pole if you are installing in a area that does not have a natural section break.
It can provide a lower-cost manual access point for occasional use, but it is not self-closing or self-latching. If your local pool-barrier requirements call for a self-closing, self-latching gate, a handled fence opening is not a substitute.
We are working on creating videos for this product but there are currently no videos available.
Green (Basic): DIY-friendly. Uses standard tools like a hammer drill (owned or rented). No specialty parts or complex techniques required.
Yellow (Intermediate): Moderate difficulty. Requires specialized installation techniques and additional or custom-ordered parts.
Orange (Advanced): High difficulty. Requires a core drill for 1-inch fencing and/or advanced professional installation methods.
Red (Expert): Complex projects. Involves steep slopes, large elevation changes, custom on-site fabrication, and specialized equipment.
The warranty coverage for your core bit depends on the manufacturer selected when purchasing.
All-Safe branded core bits are covered by the All-Safe Limited Lifetime Warranty against defects in materials and workmanship under normal use. Warranty coverage does not apply to normal wear, misuse, improper operation, improper storage, damage resulting from incorrect drilling practices, or normal wear of the diamond cutting segments.
For complete warranty details, please review the All-Safe Limited Lifetime Warranty.
Hilti branded core bits are covered by Hilti’s manufacturer warranty program. Hilti provides warranty coverage for defects in materials and workmanship and may offer additional service and repair benefits depending on the product and warranty terms in effect at the time of purchase.
Warranty coverage does not apply to normal wear, consumable use, misuse, abuse, improper operation, unauthorized modifications, or use outside the manufacturer’s intended application.
For the most current warranty terms, exclusions, and claim procedures, please review Hilti’s warranty information directly:
https://www.hilti.com/content/resources/tool-support/local/warranty
All-Safe branded core bit warranty claims should be submitted to All-Safe.
Hilti product warranty claims must be submitted directly to Hilti.
Please note: Warranty terms are established by the applicable manufacturer and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
Safetech Hardware, a division of Advantage Industries, manufactures many of the self-closing gate latches, gate hinges, and gate hardware products offered by All-Safe.
Safetech Hardware warrants its products against defects in materials and workmanship when used under normal conditions and installed according to the manufacturer’s instructions. Warranty coverage, terms, and exclusions are determined solely by Safetech Hardware and may change without notice.
The warranty does not cover damage resulting from improper installation, misuse, abuse, unauthorized modifications, accidents, normal wear and tear, corrosion, environmental conditions, improper maintenance, acts of nature, or damage caused by materials or workmanship not provided by Safetech Hardware.
If you believe your Safetech Hardware product may be defective, warranty claims must be submitted directly to Safetech Hardware. Proof of purchase, photographs, and a description of the issue may be required to evaluate a claim.
For the most current warranty terms, exclusions, and claim procedures, please contact Safetech Hardware directly or review the manufacturer’s warranty information.
Website:
https://www.adv22.com/
Email:
[email protected]
Please note: Warranty terms are established by Safetech Hardware and Advantage Industries and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
D&D Technologies manufactures many of the self-closing gate latches, magnetic latches, gate hinges, and gate hardware products offered by All-Safe.
D&D Technologies warrants its products against defects in materials and workmanship when used under normal conditions and installed according to the manufacturer’s instructions. Warranty coverage varies by product and may include limited lifetime coverage on certain items.
This warranty does not cover damage resulting from improper installation, misuse, abuse, accidents, unauthorized modifications, improper maintenance, normal wear and tear, acts of nature, or use outside the intended application.
If you believe your D&D product may be defective, warranty claims must be submitted directly to D&D Technologies. Proof of purchase and photographs may be required to evaluate a claim.
For the most current warranty terms, exclusions, and claim procedures, please contact D&D Technologies directly or review the manufacturer’s warranty documentation.
Warranty Information:
https://us.ddtech.com/pages/warranties
Email:
[email protected]
Please note: Warranty terms are established by D&D Technologies and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
Limited Lifetime Warranty
All-Safe pool fence products are backed by a Limited Lifetime Manufacturer Product Warranty covering defects in materials and workmanship.
What’s generally covered
What’s not covered
For full warranty terms, exclusions, and claim information, view our complete Warranty Information page.
