The Pool Fence Gate Frame, also known as a Pool Fence Gate Door, is essential for secure and convenient access to your fenced pool area. Pool gate frame is designed to complement your pool safety fencing; this fence gate kit with a self-closing gate frame combines durability, functionality, and style.
Price range: $80.00 through $130.00
Enhance your pool safety and convenience with our premium Swimming Pool Fence Gate Frame. Designed to seamlessly integrate into your pool fencing system, this gate frame offers a reliable and stylish entry point for your pool area. The All-Safe pool barrier fence gate frame is available in two heights; it provides the perfect balance of mesh pool fencing with safety and practicality.
Each pool security fence gate frame comes equipped with pre-installed durable mesh, pre-attached screws, and moldings, ensuring quick & easy installation. The frame is slightly shorter than standard fence heights to allow necessary ground clearance while maintaining robust protection.
To complete your gated entry, you’ll need:
Optional:
The fully assembled self-closing gate setup (gate frame, two posts, and latch/hinge kit) requires approximately 34–36 inches of horizontal space. For detailed measurements of the pool safety fence, refer to our Gate Frame Spacing diagram in the additional information tab.
This pool safety gate frame can be easily added to any existing pool fence, making it a practical and adaptable solution for pool fences for kids, the elderly and pets. Keep your loved ones safe with a durable, self-closing gate designed for peace of mind.
No related Knowledge Base articles found for this product.
To accurately determine the amount of fencing required for your project, first calculate the total perimeter that needs to be enclosed. Once you have this measurement in feet, consult the chart provided below for guidance. Each section of our fence spans 15 feet, so dividing your total perimeter by 15 will give you the number of sections needed.
If your plan includes the installation of a Self-Closing Gate, remember that each gate occupies a space of 3 feet. Therefore, you should subtract 3 feet from the total fencing length to accommodate the gate. This adjustment ensures that you purchase the correct amount of fencing material, avoiding unnecessary expenses and ensuring a seamless installation.
| Feet of Fence Needed | Fence Sections Needed |
|---|---|
|
1-15
|
1
|
|
16-30
|
2
|
|
31-45
|
3
|
|
46-60
|
4
|
|
61-75
|
5
|
|
76-90
|
6
|
|
91-105
|
7
|
|
106-120
|
8
|
|
121-135
|
9
|
|
136-150
|
10
|
|
151-165
|
11
|
|
166-180
|
12
|
|
181-195
|
13
|
The warranty coverage for your core bit depends on the manufacturer selected when purchasing.
All-Safe branded core bits are covered by the All-Safe Limited Lifetime Warranty against defects in materials and workmanship under normal use. Warranty coverage does not apply to normal wear, misuse, improper operation, improper storage, damage resulting from incorrect drilling practices, or normal wear of the diamond cutting segments.
For complete warranty details, please review the All-Safe Limited Lifetime Warranty.
Hilti branded core bits are covered by Hilti’s manufacturer warranty program. Hilti provides warranty coverage for defects in materials and workmanship and may offer additional service and repair benefits depending on the product and warranty terms in effect at the time of purchase.
Warranty coverage does not apply to normal wear, consumable use, misuse, abuse, improper operation, unauthorized modifications, or use outside the manufacturer’s intended application.
For the most current warranty terms, exclusions, and claim procedures, please review Hilti’s warranty information directly:
https://www.hilti.com/content/resources/tool-support/local/warranty
All-Safe branded core bit warranty claims should be submitted to All-Safe.
Hilti product warranty claims must be submitted directly to Hilti.
Please note: Warranty terms are established by the applicable manufacturer and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
Safetech Hardware, a division of Advantage Industries, manufactures many of the self-closing gate latches, gate hinges, and gate hardware products offered by All-Safe.
Safetech Hardware warrants its products against defects in materials and workmanship when used under normal conditions and installed according to the manufacturer’s instructions. Warranty coverage, terms, and exclusions are determined solely by Safetech Hardware and may change without notice.
The warranty does not cover damage resulting from improper installation, misuse, abuse, unauthorized modifications, accidents, normal wear and tear, corrosion, environmental conditions, improper maintenance, acts of nature, or damage caused by materials or workmanship not provided by Safetech Hardware.
If you believe your Safetech Hardware product may be defective, warranty claims must be submitted directly to Safetech Hardware. Proof of purchase, photographs, and a description of the issue may be required to evaluate a claim.
For the most current warranty terms, exclusions, and claim procedures, please contact Safetech Hardware directly or review the manufacturer’s warranty information.
Website:
https://www.adv22.com/
Email:
[email protected]
Please note: Warranty terms are established by Safetech Hardware and Advantage Industries and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
D&D Technologies manufactures many of the self-closing gate latches, magnetic latches, gate hinges, and gate hardware products offered by All-Safe.
D&D Technologies warrants its products against defects in materials and workmanship when used under normal conditions and installed according to the manufacturer’s instructions. Warranty coverage varies by product and may include limited lifetime coverage on certain items.
This warranty does not cover damage resulting from improper installation, misuse, abuse, accidents, unauthorized modifications, improper maintenance, normal wear and tear, acts of nature, or use outside the intended application.
If you believe your D&D product may be defective, warranty claims must be submitted directly to D&D Technologies. Proof of purchase and photographs may be required to evaluate a claim.
For the most current warranty terms, exclusions, and claim procedures, please contact D&D Technologies directly or review the manufacturer’s warranty documentation.
Warranty Information:
https://us.ddtech.com/pages/warranties
Email:
[email protected]
Please note: Warranty terms are established by D&D Technologies and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
Limited Lifetime Warranty
All-Safe pool fence products are backed by a Limited Lifetime Manufacturer Product Warranty covering defects in materials and workmanship.
What’s generally covered
What’s not covered
For full warranty terms, exclusions, and claim information, view our complete Warranty Information page.
