Designed for fence termination and turns in dirt or grass, this free-standing support post provides the strength needed when no wall or solid structure is available. Can be installed permanently in concrete or made removable using a sleeve.
⚠️ Not for full fence runs in dirt. Standard fence poles with concrete footings are required for section support.
$55.08
All-Safe has a trusted network of local pool safety installers ready to help you today!
The Free-Standing Pool Fence End & Turn Post is used when your pool fence needs to end or change direction in dirt, grass, or turf, and there is no solid structure available to attach to.
Instead of connecting to a wall, glass panel, or existing fence, this post acts as a self-supporting anchor point, holding the proper tension required for a safe and secure pool fence installation.
This post offers flexibility depending on your installation needs:
-Set directly into a concrete footing
-Provides a strong, fixed anchor point
-Install using a Round Terminating Post Sleeve
-Allows the post to be removed when needed
-Ideal for temporary or seasonal setups
This post is the right solution when:
It can also be used in situations where obstacles like irrigation, electrical, or drainage lines prevent standard installation, allowing flexibility with custom side panel connections.
This is where most confusion happens, so we call it out clearly:
❌ Not a standard fence pole for dirt installations
❌ Does not replace properly set poles with concrete footings
If you are installing a full fence run in dirt or grass, standard fence poles must be set in concrete footings.
This post is designed only for end support and directional changes (turns).
This Round Terminating Post ensures a strong and versatile foundation for your fence installation needs, providing peace of mind and flexibility for various site conditions.
Yes. The Round Terminating Post is shipped at 84 inches long and can be cut to the length needed for your installation. This allows you to customize the post height while maintaining a clean, professional appearance. Always verify your finished height requirements before making any cuts.
Yes. The Round Terminating Post can be installed either as a removable post using a Round Terminating Post Sleeve or as a permanent post by setting it directly in concrete. Both installation methods are commonly used depending on the needs of the project. For either installation method, we recommend using Rapid Set® Concrete Mix or a similar fast-setting concrete to help reduce installation time and allow the post to be secured more quickly.
Installation requirements will vary slightly depending on whether you are installing the Round Terminating Post as a removable or permanent post.
Common Tools:
For a Removable Installation:
For a Permanent Installation:
Green (Basic): DIY-friendly. Uses standard tools like a hammer drill (owned or rented). No specialty parts or complex techniques required.
Yellow (Intermediate): Moderate difficulty. Requires specialized installation techniques and additional or custom-ordered parts.
Orange (Advanced): High difficulty. Requires a core drill for 1-inch fencing and/or advanced professional installation methods.
Red (Expert): Complex projects. Involves steep slopes, large elevation changes, custom on-site fabrication, and specialized equipment.
The warranty coverage for your core bit depends on the manufacturer selected when purchasing.
All-Safe branded core bits are covered by the All-Safe Limited Lifetime Warranty against defects in materials and workmanship under normal use. Warranty coverage does not apply to normal wear, misuse, improper operation, improper storage, damage resulting from incorrect drilling practices, or normal wear of the diamond cutting segments.
For complete warranty details, please review the All-Safe Limited Lifetime Warranty.
Hilti branded core bits are covered by Hilti’s manufacturer warranty program. Hilti provides warranty coverage for defects in materials and workmanship and may offer additional service and repair benefits depending on the product and warranty terms in effect at the time of purchase.
Warranty coverage does not apply to normal wear, consumable use, misuse, abuse, improper operation, unauthorized modifications, or use outside the manufacturer’s intended application.
For the most current warranty terms, exclusions, and claim procedures, please review Hilti’s warranty information directly:
https://www.hilti.com/content/resources/tool-support/local/warranty
All-Safe branded core bit warranty claims should be submitted to All-Safe.
Hilti product warranty claims must be submitted directly to Hilti.
Please note: Warranty terms are established by the applicable manufacturer and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
Safetech Hardware, a division of Advantage Industries, manufactures many of the self-closing gate latches, gate hinges, and gate hardware products offered by All-Safe.
Safetech Hardware warrants its products against defects in materials and workmanship when used under normal conditions and installed according to the manufacturer’s instructions. Warranty coverage, terms, and exclusions are determined solely by Safetech Hardware and may change without notice.
The warranty does not cover damage resulting from improper installation, misuse, abuse, unauthorized modifications, accidents, normal wear and tear, corrosion, environmental conditions, improper maintenance, acts of nature, or damage caused by materials or workmanship not provided by Safetech Hardware.
If you believe your Safetech Hardware product may be defective, warranty claims must be submitted directly to Safetech Hardware. Proof of purchase, photographs, and a description of the issue may be required to evaluate a claim.
For the most current warranty terms, exclusions, and claim procedures, please contact Safetech Hardware directly or review the manufacturer’s warranty information.
Website:
https://www.adv22.com/
Email:
[email protected]
Please note: Warranty terms are established by Safetech Hardware and Advantage Industries and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
D&D Technologies manufactures many of the self-closing gate latches, magnetic latches, gate hinges, and gate hardware products offered by All-Safe.
D&D Technologies warrants its products against defects in materials and workmanship when used under normal conditions and installed according to the manufacturer’s instructions. Warranty coverage varies by product and may include limited lifetime coverage on certain items.
This warranty does not cover damage resulting from improper installation, misuse, abuse, accidents, unauthorized modifications, improper maintenance, normal wear and tear, acts of nature, or use outside the intended application.
If you believe your D&D product may be defective, warranty claims must be submitted directly to D&D Technologies. Proof of purchase and photographs may be required to evaluate a claim.
For the most current warranty terms, exclusions, and claim procedures, please contact D&D Technologies directly or review the manufacturer’s warranty documentation.
Warranty Information:
https://us.ddtech.com/pages/warranties
Email:
[email protected]
Please note: Warranty terms are established by D&D Technologies and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
Limited Lifetime Warranty
All-Safe pool fence products are backed by a Limited Lifetime Manufacturer Product Warranty covering defects in materials and workmanship.
What’s generally covered
What’s not covered
For full warranty terms, exclusions, and claim information, view our complete Warranty Information page.
