- Pool Fences
- Shop Online
- DIY Pool Fencing
- Pool Nets
- Pool Covers
- Resources
- About Us
Create a removable installation for an All-Safe Round Terminating Post. This ground sleeve is permanently installed in concrete to provide a secure receiver while allowing the terminating post to be removed and reinstalled when needed. Sleeve only; terminating post sold separately.
$85.00
In stock
All-Safe has a trusted network of local pool safety installers ready to help you today!
The Round Terminating Post Ground Sleeve creates a permanent receiver for an All-Safe Round Terminating Post while allowing the post itself to remain removable.
The sleeve is set securely into the ground with concrete. Once the concrete has cured, the compatible round terminating post slides into the sleeve and can be removed when the pool fence is taken down for entertaining, landscaping, seasonal storage or other temporary access.
Without a sleeve, the terminating post must be installed directly into concrete and will become a permanent part of the installation.
The sleeve is intended for ground installations where a Round Terminating Post is used to end or redirect a removable mesh pool fence near:
The Round Terminating Post is intended for specific terminating or support applications. It is not a substitute for standard pool fence poles throughout a complete fence run.
A sleeve may not be necessary when the terminating post will be permanently installed and there is no need to remove it. In that application, the post can be set directly into concrete.
If there is any possibility that the fence or terminating post will need to be removed later, installing the sleeve during the initial installation is generally the more flexible option.
It creates a permanent ground receiver that allows a compatible Round Terminating Post to be removed and reinstalled.
No. This listing includes one ground sleeve only. The All-Safe Round Terminating Post is sold separately. Purchase your Rapid Set concrete from your local hardware store.
No. The sleeve is permanently secured in concrete. The terminating post slides into and out of the installed sleeve.
Use the sleeve when you want the terminating post to be removable. A post installed directly into concrete becomes permanent.
The sleeve is intended for dirt, grass or landscaped areas where it can be securely anchored with concrete. If you need to terminate a fence at an existing concrete deck or another type of surface, contact All-Safe to discuss the appropriate installation methods or visit our knowledge base
The sleeve is designed specifically for the All-Safe Round Terminating Post. It does not fit standard removable pool fence poles, and compatibility with terminating posts from other manufacturers is not guaranteed. Round Terminating Posts are intended for specific end, turn or support applications—not for use throughout an entire fence run.
All-Safe Round Terminating Post — sold separately
Rapid-setting concrete
Shovel or post-hole digging tool
Level
Measuring tape
Mixing container, water and mixing tool
Green (Basic): DIY-friendly. Uses standard tools like a hammer drill (owned or rented). No specialty parts or complex techniques required.
Yellow (Intermediate): Moderate difficulty. Requires specialized installation techniques and additional or custom-ordered parts.
Orange (Advanced): High difficulty. Requires a core drill for 1-inch fencing and/or advanced professional installation methods.
Red (Expert): Complex projects. Involves steep slopes, large elevation changes, custom on-site fabrication, and specialized equipment.
The warranty coverage for your core bit depends on the manufacturer selected when purchasing.
All-Safe branded core bits are covered by the All-Safe Limited Lifetime Warranty against defects in materials and workmanship under normal use. Warranty coverage does not apply to normal wear, misuse, improper operation, improper storage, damage resulting from incorrect drilling practices, or normal wear of the diamond cutting segments.
For complete warranty details, please review the All-Safe Limited Lifetime Warranty.
Hilti branded core bits are covered by Hilti’s manufacturer warranty program. Hilti provides warranty coverage for defects in materials and workmanship and may offer additional service and repair benefits depending on the product and warranty terms in effect at the time of purchase.
Warranty coverage does not apply to normal wear, consumable use, misuse, abuse, improper operation, unauthorized modifications, or use outside the manufacturer’s intended application.
For the most current warranty terms, exclusions, and claim procedures, please review Hilti’s warranty information directly:
https://www.hilti.com/content/resources/tool-support/local/warranty
All-Safe branded core bit warranty claims should be submitted to All-Safe.
Hilti product warranty claims must be submitted directly to Hilti.
Please note: Warranty terms are established by the applicable manufacturer and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
Safetech Hardware, a division of Advantage Industries, manufactures many of the self-closing gate latches, gate hinges, and gate hardware products offered by All-Safe.
Safetech Hardware warrants its products against defects in materials and workmanship when used under normal conditions and installed according to the manufacturer’s instructions. Warranty coverage, terms, and exclusions are determined solely by Safetech Hardware and may change without notice.
The warranty does not cover damage resulting from improper installation, misuse, abuse, unauthorized modifications, accidents, normal wear and tear, corrosion, environmental conditions, improper maintenance, acts of nature, or damage caused by materials or workmanship not provided by Safetech Hardware.
If you believe your Safetech Hardware product may be defective, warranty claims must be submitted directly to Safetech Hardware. Proof of purchase, photographs, and a description of the issue may be required to evaluate a claim.
For the most current warranty terms, exclusions, and claim procedures, please contact Safetech Hardware directly or review the manufacturer’s warranty information.
Website:
https://www.adv22.com/
Email:
[email protected]
Please note: Warranty terms are established by Safetech Hardware and Advantage Industries and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
D&D Technologies manufactures many of the self-closing gate latches, magnetic latches, gate hinges, and gate hardware products offered by All-Safe.
D&D Technologies warrants its products against defects in materials and workmanship when used under normal conditions and installed according to the manufacturer’s instructions. Warranty coverage varies by product and may include limited lifetime coverage on certain items.
This warranty does not cover damage resulting from improper installation, misuse, abuse, accidents, unauthorized modifications, improper maintenance, normal wear and tear, acts of nature, or use outside the intended application.
If you believe your D&D product may be defective, warranty claims must be submitted directly to D&D Technologies. Proof of purchase and photographs may be required to evaluate a claim.
For the most current warranty terms, exclusions, and claim procedures, please contact D&D Technologies directly or review the manufacturer’s warranty documentation.
Warranty Information:
https://us.ddtech.com/pages/warranties
Email:
[email protected]
Please note: Warranty terms are established by D&D Technologies and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
Limited Lifetime Warranty
All-Safe pool fence products are backed by a Limited Lifetime Manufacturer Product Warranty covering defects in materials and workmanship.
What’s generally covered
What’s not covered
For full warranty terms, exclusions, and claim information, view our complete Warranty Information page.
