Simplify your pool fence installation with the ALLSAFE Hammer Drill Guide. Designed for straight and angled holes, this portable guide works with rotary hammer drills to help align 5/8″ masonry bits for peg pole swimming pool fence installations. Ideal for both professionals and DIY installers of safety pool fences.
$102.25
In stock
All-Safe has a trusted network of local pool safety installers ready to help you today!
The All-Safe Portable Hammer Drill Guide is the go-to tool for accurately drilling holes in concrete, pavers, or solid surfaces when installing a removable mesh fence around the pool. Whether you’re a DIY homeowner or a professional installer, this hammer drill for pool fence guides helps ensure straight or angled holes with less hassle and more confidence.
*You can purchase a hammer drill bit from your local hardware store. The drill bit shown in our videos is 5/8" x 18"
The guide is designed for removable pool fencing that uses 1/2-inch Peg Poles installed in 5/8-inch deck sleeves. It is not compatible with Classic or Ultra 1-inch fence poles, which require larger wet core-drilled holes.
No. The guide does not include a rotary hammer drill or masonry bit. You will need a rotary hammer drill and a 5/8-inch × 18-inch masonry bit, which can typically be purchased or rented locally.
Yes. The guide can be adjusted up to 10° to create straight or angled holes. Angled holes may be used to improve fence tension or accommodate certain layout conditions.
This guide is primarily intended for concrete and solid masonry. Pavers, tile, and other finished surfaces can crack or shift and may require a different drilling method or professional installation.
The video shows a prototype accessory that is not included with the Hammer Drill Guide and is not available for purchase. It was used during early product testing but is not required to operate the guide or successfully drill your fence holes.
Rotary hammer drill
5/8-inch × 18-inch masonry drill bit
Tape measure
Chalk or marking pencil
Shop vacuum or blower for removing drilling dust
Green (Basic): DIY-friendly. Uses standard tools like a hammer drill (owned or rented). No specialty parts or complex techniques required.
Yellow (Intermediate): Moderate difficulty. Requires specialized installation techniques and additional or custom-ordered parts.
Orange (Advanced): High difficulty. Requires a core drill for 1-inch fencing and/or advanced professional installation methods.
Red (Expert): Complex projects. Involves steep slopes, large elevation changes, custom on-site fabrication, and specialized equipment.
The warranty coverage for your core bit depends on the manufacturer selected when purchasing.
All-Safe branded core bits are covered by the All-Safe Limited Lifetime Warranty against defects in materials and workmanship under normal use. Warranty coverage does not apply to normal wear, misuse, improper operation, improper storage, damage resulting from incorrect drilling practices, or normal wear of the diamond cutting segments.
For complete warranty details, please review the All-Safe Limited Lifetime Warranty.
Hilti branded core bits are covered by Hilti’s manufacturer warranty program. Hilti provides warranty coverage for defects in materials and workmanship and may offer additional service and repair benefits depending on the product and warranty terms in effect at the time of purchase.
Warranty coverage does not apply to normal wear, consumable use, misuse, abuse, improper operation, unauthorized modifications, or use outside the manufacturer’s intended application.
For the most current warranty terms, exclusions, and claim procedures, please review Hilti’s warranty information directly:
https://www.hilti.com/content/resources/tool-support/local/warranty
All-Safe branded core bit warranty claims should be submitted to All-Safe.
Hilti product warranty claims must be submitted directly to Hilti.
Please note: Warranty terms are established by the applicable manufacturer and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
Safetech Hardware, a division of Advantage Industries, manufactures many of the self-closing gate latches, gate hinges, and gate hardware products offered by All-Safe.
Safetech Hardware warrants its products against defects in materials and workmanship when used under normal conditions and installed according to the manufacturer’s instructions. Warranty coverage, terms, and exclusions are determined solely by Safetech Hardware and may change without notice.
The warranty does not cover damage resulting from improper installation, misuse, abuse, unauthorized modifications, accidents, normal wear and tear, corrosion, environmental conditions, improper maintenance, acts of nature, or damage caused by materials or workmanship not provided by Safetech Hardware.
If you believe your Safetech Hardware product may be defective, warranty claims must be submitted directly to Safetech Hardware. Proof of purchase, photographs, and a description of the issue may be required to evaluate a claim.
For the most current warranty terms, exclusions, and claim procedures, please contact Safetech Hardware directly or review the manufacturer’s warranty information.
Website:
https://www.adv22.com/
Email:
[email protected]
Please note: Warranty terms are established by Safetech Hardware and Advantage Industries and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
D&D Technologies manufactures many of the self-closing gate latches, magnetic latches, gate hinges, and gate hardware products offered by All-Safe.
D&D Technologies warrants its products against defects in materials and workmanship when used under normal conditions and installed according to the manufacturer’s instructions. Warranty coverage varies by product and may include limited lifetime coverage on certain items.
This warranty does not cover damage resulting from improper installation, misuse, abuse, accidents, unauthorized modifications, improper maintenance, normal wear and tear, acts of nature, or use outside the intended application.
If you believe your D&D product may be defective, warranty claims must be submitted directly to D&D Technologies. Proof of purchase and photographs may be required to evaluate a claim.
For the most current warranty terms, exclusions, and claim procedures, please contact D&D Technologies directly or review the manufacturer’s warranty documentation.
Warranty Information:
https://us.ddtech.com/pages/warranties
Email:
[email protected]
Please note: Warranty terms are established by D&D Technologies and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
Limited Lifetime Warranty
All-Safe pool fence products are backed by a Limited Lifetime Manufacturer Product Warranty covering defects in materials and workmanship.
What’s generally covered
What’s not covered
For full warranty terms, exclusions, and claim information, view our complete Warranty Information page.
