$3.95
Out of stock
Limited
Lifetime Warranty
This product is not covered by the
All-Safe Limited Lifetime Warranty.
All-Safe has a trusted network of local pool safety installers ready to help you today!
The Peg Pole Drill Spacing Template provides a quick visual reference for marking the standard 36-inch spacing used between All-Safe 1/2-inch Peg Poles. Position the template on the deck, mark the next hole location, and continue along the planned fence line.
This template is optional and is not required to install an All-Safe pool fence. Many professional installers measure and mark each hole using a tape measure. However, DIY installers may find the template helpful for maintaining consistent spacing and reducing repeated measurements along straight fence runs.
The template is intended for laying out hole locations only. It does not guide the drill, control the drilling angle, or replace proper measuring, layout, and drilling techniques. Curves, corners, gates, elevation changes, and other nonstandard areas may require adjusted spacing and individual measurements.
No related resources found for this product.
No. Professional installers commonly measure and mark the hole locations with a tape measure. The template is an optional layout aid for DIY installers who prefer a repeatable reference for standard 36-inch pole spacing.
No. It identifies the next hole location but does not control the drill or drilling angle. For help maintaining the proper drilling angle, consider using the All-Safe Hammer Drill Guide.
The template works best on straight fence runs with standard 36-inch pole spacing. Curves, corners, gates, elevation changes, and terminating points may require adjusted spacing and individual measurements.
It is designed for removable pool fencing that uses 1/2-inch Peg Poles installed at standard 36-inch spacing. It is not intended for Classic or Ultra 1-inch fence poles.
We are working on creating videos for this product but there are currently no videos available.
Out of Stock
Green (Basic): DIY-friendly. Uses standard tools like a hammer drill (owned or rented). No specialty parts or complex techniques required.
Yellow (Intermediate): Moderate difficulty. Requires specialized installation techniques and additional or custom-ordered parts.
Orange (Advanced): High difficulty. Requires a core drill for 1-inch fencing and/or advanced professional installation methods.
Red (Expert): Complex projects. Involves steep slopes, large elevation changes, custom on-site fabrication, and specialized equipment.
The warranty coverage for your core bit depends on the manufacturer selected when purchasing.
All-Safe branded core bits are covered by the All-Safe Limited Lifetime Warranty against defects in materials and workmanship under normal use. Warranty coverage does not apply to normal wear, misuse, improper operation, improper storage, damage resulting from incorrect drilling practices, or normal wear of the diamond cutting segments.
For complete warranty details, please review the All-Safe Limited Lifetime Warranty.
Hilti branded core bits are covered by Hilti’s manufacturer warranty program. Hilti provides warranty coverage for defects in materials and workmanship and may offer additional service and repair benefits depending on the product and warranty terms in effect at the time of purchase.
Warranty coverage does not apply to normal wear, consumable use, misuse, abuse, improper operation, unauthorized modifications, or use outside the manufacturer’s intended application.
For the most current warranty terms, exclusions, and claim procedures, please review Hilti’s warranty information directly:
https://www.hilti.com/content/resources/tool-support/local/warranty
All-Safe branded core bit warranty claims should be submitted to All-Safe.
Hilti product warranty claims must be submitted directly to Hilti.
Please note: Warranty terms are established by the applicable manufacturer and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
Safetech Hardware, a division of Advantage Industries, manufactures many of the self-closing gate latches, gate hinges, and gate hardware products offered by All-Safe.
Safetech Hardware warrants its products against defects in materials and workmanship when used under normal conditions and installed according to the manufacturer’s instructions. Warranty coverage, terms, and exclusions are determined solely by Safetech Hardware and may change without notice.
The warranty does not cover damage resulting from improper installation, misuse, abuse, unauthorized modifications, accidents, normal wear and tear, corrosion, environmental conditions, improper maintenance, acts of nature, or damage caused by materials or workmanship not provided by Safetech Hardware.
If you believe your Safetech Hardware product may be defective, warranty claims must be submitted directly to Safetech Hardware. Proof of purchase, photographs, and a description of the issue may be required to evaluate a claim.
For the most current warranty terms, exclusions, and claim procedures, please contact Safetech Hardware directly or review the manufacturer’s warranty information.
Website:
https://www.adv22.com/
Email:
[email protected]
Please note: Warranty terms are established by Safetech Hardware and Advantage Industries and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
D&D Technologies manufactures many of the self-closing gate latches, magnetic latches, gate hinges, and gate hardware products offered by All-Safe.
D&D Technologies warrants its products against defects in materials and workmanship when used under normal conditions and installed according to the manufacturer’s instructions. Warranty coverage varies by product and may include limited lifetime coverage on certain items.
This warranty does not cover damage resulting from improper installation, misuse, abuse, accidents, unauthorized modifications, improper maintenance, normal wear and tear, acts of nature, or use outside the intended application.
If you believe your D&D product may be defective, warranty claims must be submitted directly to D&D Technologies. Proof of purchase and photographs may be required to evaluate a claim.
For the most current warranty terms, exclusions, and claim procedures, please contact D&D Technologies directly or review the manufacturer’s warranty documentation.
Warranty Information:
https://us.ddtech.com/pages/warranties
Email:
[email protected]
Please note: Warranty terms are established by D&D Technologies and may change without notice. The manufacturer’s published warranty policy shall govern all warranty claims.
Limited Lifetime Warranty
All-Safe pool fence products are backed by a Limited Lifetime Manufacturer Product Warranty covering defects in materials and workmanship.
What’s generally covered
What’s not covered
For full warranty terms, exclusions, and claim information, view our complete Warranty Information page.
